Manufactory Supply Poly-Ethylene Oxide-Mv8000000CAS#25322-68-3

• Certification: RoHS, ISO
• Shape: Powder
• Type: Hormone
• CAS: 9004-81-3
• Assay: 99%Min
• Pack: 200kgs
• Model NO.: Poly(ethylene oxide)
• Delivery: Prompt
• Function: Vitamin Additives
• Transport Package: 25kgs/Paper Box
• Specification: purity: 99.0%
• Trademark: Lonwin
• Origin: Made in China
• HS Code: 39072900
• Production Capacity: 60mt Per Month

Product Description

            

	MATERIAL SAFETY DATA SHEET

                                                       
Section 1 - Product and Company Information

Product detail

1.1 Product identifiers
Product identifiers
Product name : Poly(ethylene oxide)
Product Number : P432439
Brand : LONWIN
CAS-No. : 25322-68-3
Molecular Formula: C2nH4n+2On+1

Manufacturer/Supplier

Lonwin Industry Group Limited 
Address: Fagina Building,No 966 Huaxu Road, 
Qingpu District,Shanghai, 201702, P.R. China.
     
   


Section 2 - Composition/Information on Ingredients
Substances
Synonyms : PEO
Formula : C2nH4n+2On+1
Molecular weight : no data available
CAS No. : 25322-68-3
EC-NO. : no data available
Component              Classification                     Concentration
Poly(ethylene oxide)
no data available          average Mv~8,000,000,powder





Section 3 - : Hazards identification
2.1 Classification of the substance or mixture
GHS Classification in accordance with 29 CFR 1910 (OSHA HCS)
Acute toxicity,oral(Category 4) H302
Skin corrosion/irritation(Category 2)H315
Serious eye damage/eye irritation(Category 2A )H319
Specific target organ toxicity,single exposure;Respiratory system(Category 3)H335
2.2 GHS Label elements, including precautionary statements
Pictogram no data available
Signal word Warning
Hazard statement(s)
H302 Harmful if swallowed
H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation
Precautionary statement(s)
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses if present and easy to do - continue rinsing.
2.3 Hazards not otherwise classified (HNOC) or not covered by GHS
Additional precautionary phrases are located throughout the safety data sheet.





Section 4 - First Aid Measures
4.1 Description of first aid measures
General advice
Consult a physician.Show this safety data sheet to the doctor in attendance.Move out of dangerous area.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Take victim
immediately to hospital. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. Continue rinsing eyes during
transport to hospital.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult
a physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2)
4.3 Indication of any immediate medical attention and special treatment needed
no data available






Section 5 - Fire Fighting Measures
5.1 Extinguishing media
Suitable extinguishing media
alcohol-resistant foam, dry chemical or carbon dioxide
Unsuitable extinguishing media
no data available
5.2 Special hazards arising from the substance or mixture
In combustion toxic fumes may form.
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information
Use water spray to cool unopened containers.


.

Section 6 - Accidental Release Measures
6.1 Personal precautions, protective equipment and emergency procedures
Wear respiratory protection. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate
ventilation. Evacuate personnel to safe areas. Avoid breathing dust. Do not attempt to take action without suitable
protective clothing. For personal protection see section 8.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains or river. Alert the neighbourhood
to the presence of fumes or gas.
6.3 Methods and materials for containment and cleaning up
Mix with sand or vermiculite. Sweep up and shovel. Transfer to a closable, labelled salvage container for disposal by
an appropriate method.
6.4 Reference to other sections
For disposal see section 13.

Section 7 - Handling and Storage
7.1 Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling.
Ensure there is sufficient ventilation of the area. Normal measures for preventive fire protection. For precautions see
section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a dry and well-ventilated area.Containers which are opened must be carefully
resealed and kept upright to prevent leakage.Sealed in dry,Room Temperature
7.3 Specific end use(s)
no data available.

Section 8 - Exposure Controls / Personal Protection
8.1 Control parameters
8.2 Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of
workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without
touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after
use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected
protective gloves have to satisfy the specifications of Regulation (EU)2016/425 and the standard EN 374
derived from it.
Body Protection
Complete suit protecting against chemicals, Flame retardant antistatic protective clothing,The type of
protective equipment must be selected according to the concentration and amount of the dangerous
substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a fullface particle respirator type
N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the
sole means of protection,use a full-face supplied air respirator. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN(EU).
Control of environmental exposure
If safety requires, prevent further leakage or spillage. Do not let the product enter the sewer.
Section 9 - Physical/Chemical Properties
9.1 Information on basic physical and chemical properties
a) Appearance no data available
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing point no data available
f) Initial boiling point and boiling range no data available
g) Flash point no data available
h) Evaporation rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower flammability or
explosive limits no data available
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n-octanol/water no data available
p) Auto-ignition temperature no data available
q) Decomposition temperature no data available
r) Viscosity no data available
s) Explosive properties N no data available
t) Oxidizing properties N no data available
9.2 Other safety information
no data available

 

Section 10 - Stability and Reactivity

10.1 Reactivity
no data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
no data available
10.4 Conditions to avoid
Heat, flames and sparks.
10.5 Incompatible materials
no data available
10.6 Hazardous decomposition products
Carbon monoxide, Carbon dioxide.

 

Section 11 - Toxicological Information

Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
no data available
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
no data available


Section 12 - Ecological Information
12.1 Toxicity
no data available
12.2 Persistence and degradability
no data available
12.3 Bioaccumulative potential
no data available
12.4 Mobility in soil
no data available
12.5 Results of PBT and vPvB assessment
no data available
12.6 Other adverse effects
no data available

Section 13 - Disposal Considerations
Product
Consult state, local or national regulations for proper disposal. Hand over to authorised disposal company as
hazardous waste.
Contaminated packaging
Dispose of as unused product.




Section 14 - Transport Information
DOT (US)
UN number: no data available Packing group: no data available Class: no data available
Proper shipping name: no data
available
Reportable Quantity(RQ): no data
available
Poison Inhalation Hazard: no data
available
Environmental Hazards: NO
IMDG
UN number: no data available Packing group: no data available EMS-No: no data available
Proper shipping name: no data available
IATA
UN number: no data available Packing group: no data available Class: no data available
Proper shipping name: no data available





Section 15 - Regulatory Information
15.1 Safety, health and environmental regulations/legislation specific for the 
substance or mixture
National regulatory information
Other regulations
Please pay attention on the waste treatment should also comply with local regulations 
requirement.




Section 16 - Other Information

Warranty

Further information
The above information is believed to be correct but does not purport to be all inclusive 
and shall be used only as a guide. The information in this document is based on the 
present state of our knowledge and is applicable to the product with regard to 
appropriate safety precautions. It does not represent any guarantee of the properties of 
the product. Lonwin Industry Group Limited and its Affiliates shall not be held liable for any 
damage resulting from handling or from contact with the above product.And the reverse side of invoice or packing slip for additional terms and conditions of sale.
Copyright 2022 Lonwin Industry Group Limited. License granted to make unlimited paper copies for internal use only.
The branding on the header and/or footer of this document may temporarily not visually 
match the product purchased as we transition our branding. However, all of the 
information in the document regarding the product remains unchanged and matches the 
product ordered. For further information please contact [email protected].